{"id":29320,"date":"2026-10-30T15:40:00","date_gmt":"2026-10-30T12:40:00","guid":{"rendered":"http:\/\/arvellodekorcom.local\/membran-pres-nedir-pvc-folyo-kaplama-adim-adim\/"},"modified":"2026-10-30T15:40:00","modified_gmt":"2026-10-30T12:40:00","slug":"membran-pres-nedir-pvc-folyo-kaplama-adim-adim","status":"publish","type":"post","link":"https:\/\/arvellodekor.com\/en\/membran-pres-nedir-pvc-folyo-kaplama-adim-adim\/","title":{"rendered":"What Is Membrane Pressing? PVC Foil Wrapping Step by Step"},"content":{"rendered":"

Membrane pressing is the method of applying PVC foil to MDF parts using heat and pressure. The foil wraps the face, the edges and CNC-routed profiles in a single piece, giving door and cabinet fronts a seamless surface with no visible joints.<\/p>\n

How does a membrane press work?<\/h2>\n

Foil is laid over the parts placed on the machine table. When the press closes, the foil is heated until it softens, then vacuum and pressure push it into every recess of the part. In some applications a heat-resistant silicone membrane sits on top of the foil; it spreads the pressure evenly and helps the foil bond properly even on deep profiles.<\/p>\n

PVC foil wrapping step by step<\/h2>\n
    \n
  1. MDF preparation:<\/strong> Parts are cut to size, profiles are routed on the CNC and sharp corners are rounded. A smooth, clean base directly determines the quality of the finish.<\/li>\n
  2. Dust removal:<\/strong> Chips and dust are blown off with compressed air. Even the smallest remaining particle shows up as a bump under the foil.<\/li>\n
  3. Applying the adhesive:<\/strong> Membrane press adhesive is sprayed evenly over the faces and edges with a compressor-driven spray gun, then left to dry.<\/li>\n
  4. Pressing:<\/strong> The foil is laid down and the press is started. The recommended values for our Membrane Press Adhesive are about 60 \u00b0C, 2\u20136 bar of pressure and a pressing time of 70\u2013130 seconds depending on conditions.<\/li>\n
  5. Trimming and final inspection:<\/strong> Once the parts have cooled, excess foil is trimmed from the edges. Faces, edges and profiles are checked for bubbles, wrinkles and lifting.<\/li>\n<\/ol>\n

    Common mistakes<\/h2>\n